Description
Features:
- This industry-leading LED T8 Type A+B replacement lamp produces 120 Lumens per watt.
- Includes an internal LED Driver for Ballast Compatible, Plug & Play, O.C.V. 600V, or Ballast Bypass, Direct Wire, Dual-Ended Power input.
- Anti-UV Frosted Polycarbonate Lens for even light transmission and to prevent discoloration.
- Suitable for replacing 2Ft linear fluorescent lamps in commercial and industrial locations.
- Overpower, short and open circuit protected.
- No noise, No UV, No IR, Mercury-free, RoHS compliant.
- Fire-resisting sleeves: UL94 V0 level, high temperature resistant, thermal-insulation, inflaming retarding & anti climate aging much prolong tubes life time.
Specifications:
| Bulb Type |
LED T8 |
| Voltage | AC 100-277V |
| Wattage | 10W |
| Light Output | 1200Lm |
| Efficacy | 120Lm/W |
| Color Temperature | 3000K |
| Power Factor | >0.95 |
| CRI | >80 |
| Beam Angle | 150° |
| Driver | Type A+B, Hybrid |
| Dimmable | No |
| Diameter | Ø28mm |
| Length | 2Ft (600mm) |
| Base | G13 |
| Housing | Aluminum Base + PC Cover |
| Lens | Clear |
| Application | Dual Ended Power |
| Life Span | 50,000 Hours |
| Certificate | UL, cUL |
| Operating Temperature | -20~40°C |
| THD | <20% |
| Package | 25pcs/ctn |
Installation:
- Turn off the power to the light fixture at the breaker panel before installation.
- Open the diffuser from the light fixture.
- Remove the fluorescent tubes. Please dispose of these items properly as they contain mercury.
- For Plug & Play Installation, skip step 5 and go to 6.
- For Retrofit Installation, bypass the ballast and make the new wire connect to the branch circuit shown as the diagram below
- Replace the cover over the wiring channel
- Install the LED tubes, close the diffuser.
- Turn on the power.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.